3D print Ghrishneshwar Temple
A free, printable model of Ghrishneshwar Temple and its tall tiered spire, set among surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ghrishneshwar Temple in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tiered spire and thin finial
The spire narrows through many small tiers to a finial. Print friendly adapts these fine details to the print scale; Full detail keeps them, best on a larger print with 0.12–0.16 mm layers.
- Porch columns
The porch in front has slender columns. Printing slowly and at a larger size helps keep them intact.
- One piece with the ground
Ghrishneshwar Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ghrishneshwar Temple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ghrishneshwar Temple
Ghrishneshwar Jyotirlinga, also called Grishneswhar, is a Hindu temple devoted to Shiva in the village of Verul, Aurangabad district, Maharashtra. It counts among the 12 Jyotirlinga mandirs. Protected as a national site, it lies one and a half kilometers from the Ellora Caves, 30 kilometers (19 miles) north-west of Aurangabad and 300 kilometers (190 miles) east-northeast of Mumbai. The Shiva Purana and Skanda Purana mention it, as do the Ramayana and the Mahabharata.
The Delhi Sultanate destroyed the temple structure in the 13th and 14th centuries. Afterward it was rebuilt several times and wrecked again amid the Mughal-Maratha conflict. Shivaji's grandfather, Maloji Bhosale, made the first restoration in the 16th century. Once the Mughal Empire had fallen, the temple was rebuilt in 1729 in the form it has today, sponsored by Gautama Bai Holkar, queen of Indore.
Traditional accounts differ on where the name comes from. In a story from the Padma Purana, Ghṛṣṇā, a woman of deep devotion, asks Śiva to come and live in this place, which gives the name Lord of Ghṛṣṇā. A rarer variant, Ghrneshwara, translates as lord of compassion. Anyone may enter the temple premises and inner chambers, but local Hindu tradition asks men to go bare-chested to enter the sanctum, the garbha-gruha.
About this model
Ghrishneshwar Temple is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





