A white 3D print of Governor's House, Calton, a castellated building with a round tower and slim turrets, set on a green hillside beside curving roads and larger buildings.

3D print Governor's House, Calton

A free, printable model of Governor's House, Calton, a small castellated building with round turrets on a green hillside, with nearby roads and buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Governor's House, Calton model, North view North
  • Governor's House, Calton model, East view East
  • Governor's House, Calton model, South view South
  • Governor's House, Calton model, West view West

© OpenStreetMap contributors

The model you print

Governor's House, Calton in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Battlements and small turrets

    Crenellated parapets run along every roofline, and slim turrets rise beside the round tower. Print friendly adapts these small notches to the print scale; Full detail keeps them on a larger print.

  2. A small building on a slope

    The house is small next to the hillside around it, so a bigger print size keeps its arched windows and battlements readable. A layer height of 0.12–0.16 mm helps the round tower stay smooth.

  3. One piece with the ground

    Governor's House, Calton is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Governor's House, Calton takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Governor's House, Calton

Governor's House sits on Calton Hill in Edinburgh, Scotland, on the hill's southernmost spur, at the south-east corner of the Old Calton Burial Ground. From there it looks south over Holyrood Park, the Canongate and Waverley Station. Built in 1815–17, it is the only surviving part of Calton Jail, which was completed in 1817 and was at one time the largest prison in Scotland. Inside was the Committee Room, where the Commissioners who ran the prison met.

Archibald Elliot designed the building; Regent Arch and Waterloo Place, both close by, are also his work. With its battlements and turrets it resembles the Old Observatory House by James Craig, also on Calton Hill, though its design more likely drew on Robert Adam's earlier Bridewell of 1791, which stood beside the newer prison. The prison closed in 1927, and in 1937 everything except Governor's House was demolished to clear the site for St Andrew's House.

The building has been a category A listed building since December 14, 1970. It was once home to the multimedia team of the Scottish Government, was for a time considered as an official home for the First Minister of Scotland in place of Bute House, and is the base of the Scottish Fiscal Commission.

About this model

Governor's House, Calton is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Edinburgh

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits