A white 3D print of the Grassalkovich Palace, a long low palace with a central dome and rows of small roof windows, beside a park, wide roads and nearby buildings.

3D print the Grassalkovich Palace

A free, printable model of the Grassalkovich Palace, a long palace with a central dome and small roof windows, beside a park and wide roads, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Grassalkovich Palace model, North view North
  • Grassalkovich Palace model, East view East
  • Grassalkovich Palace model, South view South
  • Grassalkovich Palace model, West view West

© OpenStreetMap contributors

The model you print

Grassalkovich Palace in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. A row of tiny roof windows

    Small dormer windows line the long roofs on both wings. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print and a layer height of 0.12 to 0.16 mm.

  2. Central dome and porch

    A dome with a small cap rises above a rounded arched porch in the middle of the building. A larger print size keeps the arches open, and slow printing helps the curved shapes come out clean.

  3. One piece with the ground

    The Grassalkovich Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Grassalkovich Palace takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Grassalkovich Palace

The Grassalkovich Palace is a palace in Bratislava, Slovakia. Hodžovo Square is its address, and the Episcopal Summer Palace is nearby. A French garden belongs to this summer palace, which is Rococo, or Late Baroque, in style. Andreas Mayerhoffer was the architect who finished it in 1760 for Antal Grassalkovich, a Hungarian aristocrat and close friend of Maria Theresa. Antal held the post of President of the Royal Hungarian Chamber, which required him to have an apartment in the capital: Pressburg, today's Bratislava, was Hungary's capital until 1848. The palace has many rooms and an impressive staircase. Frescoes by Joseph von Pichler decorate its chapel.

Pressburg's Baroque music scene revolved around the palace, where Joseph Haydn first presented several of his pieces. Balls and parties for the Habsburg royal court took place here. Haydn conducted the orchestra when a daughter of Maria Theresa married Albert of Sachsen-Teschen.

From 1939 to 1945 the palace, adapted by Emil Belluš, served as seat of the First Slovak Republic's president. In 1950 it became the Klement Gottwald House of Pioneers, an activity center for the schoolchildren of Bratislava, who caused extensive damage. Restoration became possible after the Velvet Revolution in late 1989, and Slovakia's president took up residence there on September 30, 1996.

About this model

The Grassalkovich Palace is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Bratislava

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits