3D print Michael's Gate
A free, printable model of Michael's Gate, the surviving medieval gate and tower in Bratislava, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Michael's Gate in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 51 m
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
51 m of Michael's Gate, 14 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Lantern, gallery and spire
A tall gate tower carries a clock stage, an open lantern and two bulbous crowns below a slender needle and statue. The thin needle, the gallery rails and the lantern openings are the fine parts; use Full detail for a larger print.
- One piece with the ground
Michael's Gate is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Michael's Gate takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Michael's Gate
Michael's Gate is the one gate left from Bratislava's medieval fortifications, and it ranks among the oldest buildings in Bratislava, in Slovakia. It was built around 1300. Its present look dates from baroque rebuilding in 1758, when a statue depicting St. Michael and the Dragon was set on top.
Medieval Bratislava could be entered only through four strongly fortified gates. On the north side stood St. Michael's Gate, named for the saint and for the church of St. Michael that faced it from outside the wall. The tower was destroyed in 1529–34 and rebuilt between 1753 and 1758 in its present form, with the statue crowning a structure 51 m (56 yd) tall.
The tower contains the Bratislava City Museum's Exhibition of Weapons, and a balcony on the sixth floor looks over the Old City and the Castle. Three coats of arms decorate the north face: King Louis II's at the top, with the Kingdom of Hungary and Bratislava arms beneath. A marked historical crown path runs through the gate.
About this model
Michael's Gate is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
