3D print Hangar One (Los Angeles, California)
A free, printable 3D model of Hangar One at Los Angeles International Airport, generated in your browser from real map data, with its surroundings included.
-
North
-
East
-
South
-
West
The model you print
Hangar One (Los Angeles, California) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small roof and tower details
Roof and tower details are small at print scale. A larger print keeps more of them, and Full detail suits a fine nozzle and a 0.12–0.16 mm layer height.
- One piece with the ground
Hangar One (Los Angeles, California) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hangar One (Los Angeles, California) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hangar One (Los Angeles, California)
Hangar One, which people also call Hangar No. 1, sits at Los Angeles International Airport (LAX) in the city of Los Angeles, California. The city built it in 1929 for $35,000, and it was the first structure at the field then known as Mines Field, an airport made up of a dirt landing strip set among bean and barley fields. The Curtiss Wright Flying Service leased the hangar.
The airport opened in 1930 under the name Los Angeles Municipal Airport. Charles Lindbergh used the hangar. Near its doors, the German LZ 127 Graf Zeppelin stayed secured during its Los Angeles stop. Crowds of tens of thousands gathered nearby to watch the National Air Races in 1933 and 1936. The hangar became Historic-Cultural Monument No. 44 of the city of Los Angeles in 1966, and in 1992 it entered the National Register of Historic Places.
Two stories of brick and concrete, it was one of five buildings drawn up in a Spanish Colonial Revival design, and none of the other four remain. Its tile roofs, arches and elaborate towers are noted features. The hangar stopped being used in the 1970s and faced demolition in the early 1980s, but a group interested in both architecture and aviation persuaded airport officials to save it.
About this model
Hangar One (Los Angeles, California) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
