A white 3D print of Hiroshima Castle, a tiered keep with layered roofs on a sloping stone base, on green ground beside a stretch of water.

Hiroshima Castle in 3D

Hiroshima Castle appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Hiroshima Castle model, North view North
  • Hiroshima Castle model, East view East
  • Hiroshima Castle model, South view South
  • Hiroshima Castle model, West view West

© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)

Copyright notice

The design of Hiroshima Castle may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Layered roofs and upturned eaves

    The tiered roofs and pointed gables project outward and are thin. Print friendly adapts them to the print scale, while Full detail keeps every modeled feature, which suits larger prints and a fine nozzle.

  2. One piece with the ground

    Hiroshima Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hiroshima Castle takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Hiroshima Castle

Hiroshima Castle was the home of the daimyō, or feudal lord, of the Hiroshima Domain, in Hiroshima, Japan. Mōri Terumoto, who sat on the council of Five Elders under Toyotomi Hideyoshi, had it built between 1589 and 1599 on the Ōta River delta. When construction began, the area, then called Gokamura ("five villages"), was renamed Hiroshima.

In 1600, after the battle of Sekigahara, Mōri had to leave the castle. From 1619 until the Meiji Restoration of 1869 ended the feudal system, the Asano family were lords of the provinces of Aki and Bingo. Later the castle became a base for the military. During the First Sino-Japanese War (1894–1895), the Imperial General Headquarters operated from the castle.

During the closing months of World War II, 2nd General Army and Fifth Division had their headquarters at the castle. Atomic bombing on August 6, 1945 destroyed the main keep and its attached buildings. The present tower, mostly concrete, was completed in 1958. It replicates the original and houses a museum about local history prior to the Second World War. The castle is a Historic Site of Japan.

About this model

Hiroshima Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Hiroshima

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits