A white 3D print of the Hostal dos Reis Católicos, a large rectangular building with four inner courtyards, beside an open plaza and surrounding city blocks.

3D print the Hostal dos Reis Católicos

A free, printable model of the Hostal dos Reis Católicos, a large building around four inner courtyards, with the open square and surrounding streets beside it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Hostal dos Reis Católicos model, North view North
  • Hostal dos Reis Católicos model, East view East
  • Hostal dos Reis Católicos model, South view South
  • Hostal dos Reis Católicos model, West view West

© OpenStreetMap contributors

The model you print

Hostal dos Reis Católicos in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Four inner courtyards

    Four courtyards open through the roofline around a small central structure. A bigger print size keeps these openings clear, and a layer height of 0.12–0.16 mm keeps the roof edges crisp.

  2. Detailed entrance portal

    The central entrance has a small, richly detailed portal. Print friendly adapts its fine parts to the print scale; Full detail keeps them on a larger print.

  3. One piece with the ground

    The Hostal dos Reis Católicos is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hostal dos Reis Católicos takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Hostal dos Reis Católicos

The Hostal dos Reis Católicos, known in Spanish as the Hostal de Los Reyes Católicos and as the Parador de Santiago de Compostela, has five stars and sits on the Praza do Obradoiro in Santiago de Compostela, Spain. It stands right where the Way of St. James ends, beside the Santiago de Compostela Cathedral. It is widely regarded as one of the oldest hotels in the world to have operated continuously, and some call it the "most beautiful hotel in Europe".

After completing the pilgrimage in 1486, King Ferdinand II of Aragon and Queen Isabella I of Castile, the Catholic Monarchs, chose to build a hospital and hostelry for pilgrims at the end of the Camino de Santiago. They provided the funds in 1499, and building work started in 1501 and lasted more than ten years. The architect Enrique Egas oversaw the project, which has a Plateresque facade, and craftsmen including masons, engineers and sculptors came from across Europe. In 1526, King Carlos V completed the Plaza Obradoiro, an open square linking the Hostal and the great Cathedral.

For four centuries the building worked as a hostelry and hospital where pilgrims could recover, with a multilingual staff always on call, and every service was free of charge. In 1953 the hospital service relocated to a site nearby, and the building reopened in 1954 as a luxury hotel after a renovation, inaugurated on July 24, 1954. It joined the Paradores network on February 24, 1986. Four colonnaded courtyards sit inside the walls: two from the sixteenth century, with fountains at their centers, and two baroque ones added later.

About this model

The Hostal dos Reis Católicos is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits