A white 3D print of the Córdoba Synagogue, a small block-shaped building with a pyramid roof and a row of arched openings, packed in among neighboring buildings.

3D print the Córdoba Synagogue

A free, printable model of the Córdoba Synagogue and the densely packed buildings of the streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Córdoba Synagogue model, North view North
  • Córdoba Synagogue model, East view East
  • Córdoba Synagogue model, South view South
  • Córdoba Synagogue model, West view West

© OpenStreetMap contributors

The model you print

Córdoba Synagogue in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tiny arched openings

    The upper level has rows of small arched openings under a pyramid roof. Print friendly adapts them to the print scale; a larger print size keeps more of them crisp.

  2. A small model among close neighbors

    Dense neighboring buildings leave little room around it, so a larger print and a layer height of 0.12 mm help the roofline and arches read clearly.

  3. One piece with the ground

    The Córdoba Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Córdoba Synagogue takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Córdoba Synagogue

The Córdoba Synagogue is a former synagogue on Calle de los Judíos, number 20, in Córdoba's Jewish Quarter in Andalusia, Spain. It was completed in 1315, and its Mudéjar design is attributed to Isaac Makheb. Its small size suggests it may have been a wealthy resident's private synagogue.

It served as a synagogue up to 1492. After the expulsion of the Jews that year, the authorities seized it and turned it into Hospital Santo Quiteria, a hospital for rabies sufferers. The shoemakers' guild acquired it in 1588 and made it both a community center and a small Christian chapel. Following restoration, it reopened as a Jewish museum in 1985. Of Córdoba's synagogues, this one alone escaped destruction in the years of persecution.

The prayer hall measures 6.5 by 7 meters (21 by 23 ft) but rises 11.5 meters (38 ft) to the top of the gables, which is high even among larger synagogues. The women's section is a gallery above the entrance hall, with three wide arches opening toward the sanctuary, decorated with interwoven stucco and latticework. The courtyard has an unusual trapezoidal footprint, most likely because of the angled streets around it.

About this model

The Córdoba Synagogue is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits