3D print the Hydro-Québec Building
A free, printable model of the Hydro-Québec Building in Montreal and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hydro-Québec Building in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 110 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
110 m of the Hydro-Québec Building, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall office tower
On a tall tower, a layer height of 0.12–0.16 mm keeps vertical edges crisp, and printing slowly with good cooling helps the upper floors. A larger print keeps small details.
- One piece with the ground
The Hydro-Québec Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hydro-Québec Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hydro-Québec Building
The Hydro-Québec Building in Montreal, Quebec, Canada, stands 110 meters (360 ft) tall with 27 floors. It was completed in 1962 and was designed by Gaston Gagnier. It houses the headquarters of Hydro-Québec as well as the Premier of Quebec's Montreal offices.
The tower is on René-Lévesque Boulevard, which is named for former premier René Lévesque. In 1963 he nationalized the hydroelectric companies of Quebec while serving as a minister in Jean Lesage's government. In front of the building, a bust of Lévesque was revealed on August 24, 2001.
About this model
The Hydro-Québec Building is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
