3D print the Intempo
A free, printable model of Intempo in Benidorm, with its twin towers and the inverted crown that bridges them, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Intempo in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 203 m
- On a 160 mm print
- 50 mm
- Scale
- 1:3,750
203 m of the Intempo, 50 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender towers and bridge
The two thin towers and the suspended crown are the delicate parts. Print slowly with good cooling, and choose a larger print or Full detail to keep the bridge crisp.
- Facade bands and vents
The horizontal bands, narrow mullions and small side vents need fine layers. Use 0.12–0.16 mm; Print friendly adapts the smallest details on smaller prints.
- One piece with the ground
The Intempo is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Intempo takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Intempo
Intempo is a 47-floor skyscraper in Benidorm, Spain, reaching 202.5 meters. Its design was officially presented on January 19, 2006, and work began in 2007. Completion was originally scheduled for 2009, but the economic crisis of 2008 hit Spain's real estate sector hard. Construction was almost complete in March 2014 when the sponsor went bankrupt. SVP Global acquired the building in 2018 and finished it by mid-2021. It is Benidorm's tallest building and ranks fifth in Spain.
The tower is unusual in shape: two parallel straight towers connected by an inverted elliptical cone 150 meters up. The two shafts are separated by 20 meters and rise about 180 meters above ground, linked at the top by the cone. The front facade is a glass curtain wall in golden tones, broken into sections, while the side walls are exposed reinforced concrete with one small ventilation window on each floor. The building contains 256 apartments, and its structure is notable for very high slenderness.
About this model
The Intempo is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
