3D print the Jami Mosque
A free, printable 3D model of the Jami Mosque in Toronto and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Jami Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail at small sizes
Small details can be tiny on a small print. Print friendly adapts them to your print size, while Full detail keeps every modeled feature on a larger print or with a fine nozzle.
- One piece with the ground
The Jami Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jami Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jami Mosque
The Jami Mosque lies east of High Park, within Toronto, Ontario. It is the oldest Canadian Islamic center in the city. John Francis Brown & Son constructed the building in 1930 for the High Park Presbyterian Church. After the Muslim Society of Toronto purchased it in 1969, it was turned into the first Islamic place of worship in Toronto.
The Jami congregation dates from 1961, when its first meetings took place in a leather shop close to Dundas West and Keele. The Muslim Society of Toronto obtained money from King Faisal of Saudi Arabia in 1969 and used them to purchase the church for that congregation, creating Toronto's first permanent mosque.
About this model
The Jami Mosque is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
