3D print the Jubilee Church
A free, printable model of the Jubilee Church in Rome, with its church building and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Church walls and roofline
A church reads mainly through its walls and roofline. A larger print helps the outline read, and 0.12–0.16 mm layers keep the vertical surfaces crisp.
- Wall surfaces at scale
Large wall surfaces show layer lines clearly. Print friendly adapts small details to the print scale; Full detail keeps every modeled feature for a large print or a finer nozzle.
- One piece with the ground
The Jubilee Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jubilee Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jubilee Church
The Jubilee Church serves as both a Catholic church and a community center in Rome's Tor Tre Teste district. Its formal name is Chiesa di Dio Padre Misericordioso, or the Church of God the Merciful Father. It serves eight thousand residents of the area and was intended to help revive the neighborhood. Richard Meier, its architect, has described it as the crown jewel of the Archdiocese of Rome's Millennium project.
Meier won the commission in a 1996 competition that also included Tadao Ando, Santiago Calatrava, and Frank Gehry. The church was designed to look like a ship, with three large curved pre-cast concrete walls on its south side that form segments of spheres. Meier designed the walls to reduce peak thermal loads: their large mass limits internal heat gain, which is said to produce less temperature variation and more efficient energy use.
A titanium dioxide-based coating, also called photocatalytic cement, keeps the walls white and discourages plant growth. Italcementi designed the cement, and its research director, Enrico Borgarello, has claimed that the material breaks down air pollutants that touch it, particularly the noxious gases from car exhaust. The site also has a northeast terrace, a northwest recreation court, and a west parking area.
About this model
The Jubilee Church is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
