3D print Kek Lok Si
A free, printable model of Kek Lok Si and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kek Lok Si in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Many small roofs and details
A temple complex can have many small roofs and ornaments. Use Full detail with a larger print size to keep them, or Print friendly for a sturdier small print; a 0.12–0.16 mm layer height keeps edges crisp.
- One piece with the ground
Kek Lok Si is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kek Lok Si takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kek Lok Si
Kek Lok Si is a Buddhist temple at Ayer Itam, on Penang Island in Malaysia. No Buddhist temple in Malaysia is larger, and pilgrims come from Hong Kong, the Philippines and Singapore, among other parts of Southeast Asia. Construction began in 1890, inspired by Beow Lean, who became the first abbot. The name means "Sukhāvatī temple", and kek-lok is Hokkien for "supreme joy".
The temple's main pagoda, the Pagoda of the Ten Thousand Buddhas, was completed in 1930 and rises seven stories to a height of 30 meters (98 ft). It has a Chinese octagonal base, a Thai-style middle tier and a Burmese crown, which reflects the temple's mix of Mahayana and Theravada Buddhism. Thailand's King Rama VI laid the pagoda's foundation, so it is also named the Rama Pagoda.
A bronze statue of the Goddess of Mercy, Guanyin, opened to the public in 2002 on the hillside above the pagoda. It replaced an earlier white plaster statue that a fire had damaged. A three-tiered roof pavilion supported by 16 bronze columns was finished in 2009. Visitors climb a stairway lined with shops, and two tiers of inclined elevators carry pilgrims further uphill. The temple is a focal point for the festivals of Penang's Chinese community.
About this model
Kek Lok Si is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
