A white 3D print of the Kentucky State Capitol, a long symmetrical building with a central dome and a columned porch, set on green lawns with loop roads and paths around it.

3D print the Kentucky State Capitol

A free, printable model of the Kentucky State Capitol, with its central dome, on the lawns, paths and loop roads of its grounds in Frankfort, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Kentucky State Capitol model, North view North
  • Kentucky State Capitol model, East view East
  • Kentucky State Capitol model, South view South
  • Kentucky State Capitol model, West view West

© OpenStreetMap contributors

The model you print

Kentucky State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
18 mm
Scale
1:3,750

18 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome, drum and small lantern

    The dome sits on a columned drum and ends in a small lantern. Print friendly adapts the thin columns and the lantern to the print scale; Full detail keeps them, which suits larger prints.

  2. Rows of tall windows

    Both long wings have repeating tall windows and a columned porch on each main front. A layer height of 0.12-0.16 mm keeps the rhythm crisp, and a larger print size keeps more of it.

  3. One piece with the ground

    The Kentucky State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kentucky State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Kentucky State Capitol

The Kentucky State Capitol in Frankfort is the seat of the executive, legislative and judicial branches of the Commonwealth of Kentucky's government. It is included in the National Register of Historic Places. A capitol built in 1830 and used until 1910 stood before it and is a museum run by the Kentucky Historical Society.

The General Assembly picked Frankfort over Lexington and Louisville as the capital in 1904 and set aside $1 million for a permanent capitol in southern Frankfort. Ground was officially broken on August 14, 1905; the building was finished in 1909 for $1,180,434.80 and dedicated on June 2, 1910. Frank Mills Andrews designed it in the Beaux-Arts style, with many classical French interior designs; its staircases are replicas of those at the Opéra Garnier in Paris.

The main part of the building has three floors. The first floor houses executive offices, including those of the governor, the attorney general and the secretary of state, along with a rotunda displaying statues of well-known Kentuckians. The Supreme Court courtroom is on the second floor. On the third floor the House and Senate chambers sit at opposite ends, facing one another. A bronze Abraham Lincoln stands at the center of the rotunda.

About this model

The Kentucky State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits