3D print Kiek in de Kök, Tallinn
A free, printable model of the Kiek in de Kök tower in Tallinn, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kiek in de Kök, Tallinn in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 38 m
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
38 m of Kiek in de Kök, Tallinn, 11 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Conical roof and small windows
The pointed roof ends in a thin tip, and the round walls have small window openings. Print friendly makes the tip sturdier at small sizes; Full detail and a 0.12–0.16 mm layer height suit a larger print.
- One piece with the ground
Kiek in de Kök, Tallinn is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kiek in de Kök, Tallinn takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kiek in de Kök, Tallinn
Kiek in de Kök, an artillery tower, rises in Tallinn, Estonia, and was built in 1475. The Low German name means "Peek into the Kitchen", and it comes from the way people in the tower could look into the kitchens of houses nearby. The tower stands 38 m (125 ft) high with walls 4 m (13 ft) thick, and cannon balls from 1577 remain lodged in its outer walls.
The tower was remodeled heavily during its years in service. In the 16th and 17th centuries, earth works hid the two lowest floors, the upper floors received new gun openings, and the top floor received a new ceiling and outer wall. It was obsolete by 1760, and it was used to store archives while some floors became apartments. Restoration work in the twentieth century gave the tower and its surroundings a more historical look, and it houses a museum and a photographic gallery.
About this model
Kiek in de Kök, Tallinn is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
