3D print Tallinn Seaplane Harbour hangars
A free, printable model of the three arched hangar halls of Tallinn's Seaplane Harbour and the shoreline, roads and green patches around them, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Tallinn Seaplane Harbour hangars
Tallinn's Seaplane Harbour (Lennusadam in Estonian) houses a maritime museum, which opened in spring 2012 and belongs to the Estonian Maritime Museum. It sits in a building put up as a seaplane hangar, inside the Naval Fortress of Peter the Great, by the Tallinn aeroplane harbor.
The hall measures 8,000 m² (86,000 sq ft) in area. It was decommissioned in Soviet times. Renovation began in 2010, with funding from the Estonian state (30%) and the European Regional Development Fund (70%). The museum tells Estonia's story as a seafaring country in a modern visual style.
Lembit, a submarine from 1936 that Estonia ordered from the United Kingdom, is the main attraction and has been restored to look as it did in the 1930s. A full-scale copy of a Short Type 184 seaplane, a type from the World War I period, is on display, and a yellow submarine lets visitors try piloting. The 16th-century wreck of the wooden ship Maasilinn and the icebreaker Suur Tõll are also on show, spread across three levels: air, sea and beneath the sea.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 7 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 11 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Three barrel-vault roofs
- The hangar is three curved roofs side by side, each with a small round cap. A layer height of 0.12 to 0.16 mm keeps the curves smooth on a larger print.
- A low, wide building
- The hangar is low against its footprint. Print friendly adapts the small roof caps to the print scale, and a larger print size keeps more detail.
- One piece with the ground
- Tallinn Seaplane Harbour hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tallinn Seaplane Harbour hangars takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Tallinn Seaplane Harbour hangars is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Tallinn Seaplane Harbour hangars STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Tallinn Seaplane Harbour hangars grows with the print: about 7 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
