A white 3D print of the Kwame Nkrumah Mausoleum, a tapering tower with arched openings, standing in a pool of water among green lawns and paths.

Kwame Nkrumah Mausoleum in 3D

The Kwame Nkrumah Mausoleum appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Kwame Nkrumah Mausoleum model, North view North
  • Kwame Nkrumah Mausoleum model, East view East
  • Kwame Nkrumah Mausoleum model, South view South
  • Kwame Nkrumah Mausoleum model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Kwame Nkrumah Mausoleum may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Notched crown and thin slats

    The top ends in a ring of small notched pillars around a star, and the lower walls carry thin horizontal slats. Print friendly adapts these small parts; Full detail keeps them for larger prints.

  2. Flared legs and low arches

    The base spreads into angled legs with small arched openings. A layer height of 0.12-0.16 mm keeps the arches crisp, and a bigger print keeps them open.

  3. One piece with the ground

    The Kwame Nkrumah Mausoleum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kwame Nkrumah Mausoleum takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Kwame Nkrumah Mausoleum

In downtown Accra, Ghana's capital, the Kwame Nkrumah Memorial Park occupies the former British colonial polo grounds. Dr. E. G. A. Don Arthur was the original designer of its centerpiece, the mausoleum, which is the resting place of the first President, Kwame Nkrumah, and his wife, Fathia. The complex was dedicated in 1992 and covers five acres. It is also the spot where Nkrumah declared Ghana's independence, and a museum on the grounds displays objects from stages of his life.

In Akan culture an upside-down sword symbolizes peace, and the building is meant to represent one. Italian marble covers it from top to bottom, and a black star crowns the apex to symbolize unity. Inside, a marble floor surrounds a small mastaba-style marble grave marker ringed by river-washed rocks, and a skylight lights the grave. Water surrounds the mausoleum, standing for life.

Nkrumah began his political career after twelve years abroad, founding the Convention People's Party and winning support with his promise of national independence. Independence from Britain came in 1957 after a declaration by the Gold Coast, and in 1960 Ghanaians elected him president under a new constitution. The mausoleum closed for renovation on May 28, 2022, and reopened on July 4, 2023, after refurbishment with a redesign by Bethel Maphrey.

About this model

The Kwame Nkrumah Mausoleum is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits