A white 3D print of the Lala Mustafa Pasha Mosque, a tall Gothic-style building with twin towers and pinnacled side walls, set in a dense grid of streets and low buildings.

3D print the Lala Mustafa Pasha Mosque

A free, printable model of the Lala Mustafa Pasha Mosque in Famagusta, a tall Gothic-style building with twin towers and pinnacled side walls, set in a grid of streets and low buildings.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Lala Mustafa Pasha Mosque model, North view North
  • Lala Mustafa Pasha Mosque model, East view East
  • Lala Mustafa Pasha Mosque model, South view South
  • Lala Mustafa Pasha Mosque model, West view West

© OpenStreetMap contributors

The model you print

Lala Mustafa Pasha Mosque in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
11 mm
Scale
1:3,750

11 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Twin towers and pinnacles

    Two towers and rows of thin pinnacles along the side walls are the most delicate parts. Print friendly adapts them to the print scale; printing larger and slowly keeps more of them.

  2. Small building in a wide scene

    The mosque is small within a large block of streets and buildings. A bigger print size and Full detail suit a fine nozzle, and a layer height of 0.12-0.16 mm keeps the outline crisp.

  3. One piece with the ground

    The Lala Mustafa Pasha Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Lala Mustafa Pasha Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Lala Mustafa Pasha Mosque

Famagusta's largest medieval building, in Cyprus, began life as Saint Nicholas Cathedral, and was later called Saint Sophia (Ayasofya) Mosque of Mağusa; its present name, Lala Mustafa Pasha Mosque, dates from 1954. Construction began in 1298, and it was consecrated in 1328 as a Catholic cathedral. The Ottoman capture of Famagusta in 1571 led to its conversion into a mosque.

The French Lusignan dynasty ruled Cyprus as kings from 1192 to 1489 and brought along the latest French taste in architecture. Its Rayonnant Gothic design is quite rare outside France. It resembles Reims Cathedral so closely that people call it the Reims of Cyprus. Three doors, twin towers above the aisles and a flat roof, all typical of Crusader architecture, define its form. The Lusignans were crowned kings of Jerusalem here.

A meeting chamber called the Loggia Bembo was added at the south-west corner some time after 1480, with an elaborately moulded entrance and slender marble pillars. Earthquakes damaged the upper parts of the two towers, and the Ottoman bombardments of 1571 hurt them badly; they were never repaired. When it became a mosque, most of the statuary, stained glass and wall paintings were taken out or covered with plaster, but the Gothic structure was preserved.

About this model

The Lala Mustafa Pasha Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits