3D print Paphos Castle
A free, printable model of Paphos Castle, its crenellated roof and entrance bridge, with the sea, moat and quay around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Paphos Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Crenellated roofline
The roof edge carries many small battlements, and the rooftop tower adds more fine detail. Print friendly adapts these; for Full detail, print larger and use a 0.12–0.16 mm layer height.
- Entrance bridge over the moat
The narrow arched entrance bridge is small and thin at print scale. A bigger print size keeps it more robust.
- One piece with the ground
Paphos Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Paphos Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Paphos Castle
On Cyprus, Paphos Castle occupies the harbor's western edge in the town of Paphos and goes back to the middle of the 13th century. Its first structure rose after an earthquake in 1222 ruined Saranta Kolones, an older fortress about 600 meters (2,000 ft) to the north-east. The Lusignans built and enlarged the castle, and they also raised the Genoese Towers, whose ruins lie 80 meters (260 ft) east, right at the harbor mouth.
The main part is a big rectangular tower, 40 m by 20 m (131 ft by 66 ft), around a closed courtyard. In Ottoman times, the large rooms on the ground floor served as prisons and barracks. A small square tower on the roof, 15 m by 10 m (49 ft by 33 ft), has three large rooms where the castle guard lived, and 12 ramparts around the roof could hold cannons.
Its fortunes shifted often. The Genoese took the castle in 1373, raised its walls and altered the moat. The Venetians took it after annexing Cyprus in 1489 and, in 1570, shortly before the Ottoman invasion, destroyed the western tower. The Ottomans rebuilt that tower in 1592, as a marble slab above the entrance records. After the British arrived in 1878, the castle became a salt depot. It was designated an ancient monument in 1935, and repairs after the earthquake of 1953 were finished in 1969.
About this model
Paphos Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





