3D print the Leuven Town Hall
A free, printable model of Leuven Town Hall with its turrets and ornate front, and the old-town streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Leuven Town Hall in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender corner turrets
The octagonal turrets at the corners of the roof are tall, narrow and pointed. Print slowly with cooling and a 0.12–0.16 mm layer height, and try Full detail on a larger print.
- Niches across the front
The front is covered in small niches and pointed windows. Print friendly adapts them to the print scale; a larger print keeps more of the repeated detail.
- One piece with the ground
The Leuven Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Leuven Town Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Leuven Town Hall
Leuven Town Hall is a landmark building on the Grote Markt, the main square of Leuven in Flemish Brabant, Belgium, across from St. Peter's Church. Its Brabantine late-Gothic design was carried out from 1439 to 1469, and it is noted for ornate architecture with lace-like detail. What we see today was once the Voirste Huys, the "front house" of a bigger group of municipal buildings, begun in 1439 on the site of an earlier town hall.
Sulpitius Van Vorst, the first architect, died shortly after work began on the rear wings. Jan Keldermans II followed briefly, and his death in 1445 brought the first building phase to a close. Work resumed in 1448 under Matheus de Layens. On March 28 of that year the first stone of the front house was laid. Early plans, shaped by the Town Hall in Brussels, called for a belfry at a corner, but de Layens changed this into the symmetrical arrangement of turrets seen today. By 1460 the masonry and roof were done, and the building was complete in 1469.
The front has three main stories, and pointed Gothic windows run along the three sides that face the Grote Markt. A gallery parapet sits above, behind a steep roof with four tiers of dormers, and octagonal turrets stand at its corners. Statues stand in canopied niches all over the building. The niches and corbels are original, but the 236 statues date from after 1850. The town hall escaped World War I with only minor damage.
About this model
The Leuven Town Hall is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





