3D print Liechtenstein Castle (Maria Enzersdorf)
A free, printable model of Liechtenstein Castle and its surroundings near Maria Enzersdorf, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Liechtenstein Castle (Maria Enzersdorf) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Walls, towers and rooflines
A castle has many small wall and roof details. Print it larger, or choose Full detail with a fine nozzle, to keep them; Print friendly adapts thin parts to a smaller print.
- One piece with the ground
Liechtenstein Castle (Maria Enzersdorf) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Liechtenstein Castle (Maria Enzersdorf) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Liechtenstein Castle (Maria Enzersdorf)
Liechtenstein Castle, called Burg Liechtenstein in German, stands near Maria Enzersdorf in Lower Austria, on the border with Vienna. It lies on the edge of the Wienerwald, or Vienna Woods. The name means "bright stone" in German, and the castle is where the House of Liechtenstein, the family that rules the Principality of Liechtenstein, traces its origin and its ancestral seat.
Hugo von Liechtenstein built the castle between about 1122 and 1136 on land held as a fief from the Babenberg margraves of Austria. It began as a tower and was probably soon enlarged into a bigger palace complex during the 12th century. Ottoman forces destroyed it in 1529, during the siege of Vienna, and again in 1683, in the Battle of Vienna.
Prince Johann I Joseph of Liechtenstein purchased his ancestral seat again in 1808. The architect Joseph Hardtmuth carried out the first restoration measures between 1808 and 1816, yet the castle stayed in ruins until 1884, when Carl Gangolf Kayser rebuilt it for Johann II. The Nestroy Theatre Festival is held at the castle annually during the summer months.
About this model
Liechtenstein Castle (Maria Enzersdorf) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
