3D print the Datenpol Arena
A free, printable model of the Datenpol Arena, a multi-use stadium in the town of Maria Enzersdorf, and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A wide stadium plan
A stadium spreads across its site rather than rising. Print it larger so the field and stand edges stay clear, and use 0.12–0.16 mm layers for the shallow forms.
- One piece with the ground
The Datenpol Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Datenpol Arena takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Datenpol Arena
The Datenpol Arena stands in Maria Enzersdorf-Südstadt, Austria, as a multi-use stadium used for several kinds of events. It holds 10,600 spectators, and football is the main use of the ground. The venue is on Johann Steinböck-Straße, in the Südstadt part of Maria Enzersdorf, and it is classed as an association football venue.
VfB Admira Wacker Mödling is the stadium's tenant, and the ground is listed as the club's home ground. The club plays its home matches there. It opened in 1967, and it has also been known as the motion_invest Arena, the BSFZ-Arena and the Bundesstadion Südstadt. Admira Wacker is recorded as an occupant.
About this model
The Datenpol Arena is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
