3D print Logan Century Center 1
A free, printable model of Logan Century Center 1 and the surrounding streets and buildings of Nanning, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 382 m
- On a 160 mm print
- 105 mm
- Scale
- 1:3,750
382 m of Logan Century Center 1, 105 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Sloped crown and dense facade
The tower ends in a sloped crown and has closely spaced vertical lines on each face. Use 0.12–0.16 mm layers and print slowly with cooling so the tall, thin upper section stays clean.
- One piece with the ground
Logan Century Center 1 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Logan Century Center 1 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Logan Century Center 1
Logan Century Center 1 is a supertall skyscraper in Nanning, China. Construction work on the tower began in 2013 and ended in 2018. The tower rises 382 meters (1,253.3 ft) and has 82 floors above ground. It is recorded both as a tower block and as a skyscraper.
Two further height figures are recorded for the tower: 381.3 meters to the architectural top and 390 meters to the pinnacle. The tower's height is given as 382 meters (1,253.3 ft). The 390-meter value measures to the pinnacle, while the 381.3-meter value measures to the architectural top.
About this model
Logan Century Center 1 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
