3D print Guangxi China Resources Tower
A free, printable 3D model of Guangxi China Resources Tower in Nanning, generated from real map data in your browser and set among the surrounding city.
-
North
-
East
-
South
-
West
- Real height
- 403 m
- On a 160 mm print
- 108 mm
- Scale
- 1:3,750
403 m of Guangxi China Resources Tower, 108 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Supertall tower at print scale
A larger print keeps the long shaft and the top of the tower legible; 0.12–0.16 mm layers help the vertical faces stay crisp.
- One piece with the ground
Guangxi China Resources Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Guangxi China Resources Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Guangxi China Resources Tower
Guangxi China Resources Tower is a skyscraper in Nanning, Guangxi, China; it is also called China Resources Centre Block A. The tower is 403 meters (1,322.2 feet) tall and has a total of 85 floors above ground. Construction started in 2014, and the building opened on November 2, 2020.
The tower is a supertall skyscraper. An earlier design called for a height of 445 meters (1,460 feet), but the taller scheme was canceled during construction because of airspace restrictions. The building opened in 2020 at a height of 403 meters (1,322.2 feet), with 85 floors above ground.
About this model
Guangxi China Resources Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
