3D print Madison Square Park Tower
A free, printable model of Madison Square Park Tower, a tall slender tower, and the dense Manhattan buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Madison Square Park Tower
Madison Square Park Tower, formerly 45 East 22nd Street, was completed in 2017 as a skyscraper. It stands between Broadway and Park Avenue South, within Manhattan's Flatiron District. Kohn Pedersen Fox designed it with Goldstein, Hill & West Architects, and Ian Bruce Eichner's Continuum Company developed it. It was the second skyscraper built on its block, after One Madison. Martin Brudnizki Design Studio designed the interiors of its 83 condominiums.
The base is granite, chosen to echo other buildings in the Flatiron District. A cantilevered tower rises above it and grows wider the higher it goes. DeSimone Consulting Engineers handled the structure, which uses slabs and columns of cast-in-place concrete, plus shear wall cores that resist lateral loads. At the roof, a tuned mass damper weighing 540 thousand kilograms (1.2 million pounds) relies on viscous liquid and steel plates to reduce the building's movement in wind.
Amenities include a fitness center spread over levels two to four, with a basketball court and a golf studio, along with a playroom for children, a library and, on the fifty fourth floor, a club that has its own private dining room. Demolition of the buildings on the lot began in April 2014 and was done by July 2014.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 64 mm | 1:3,750 |
| 200 mm | 80 mm | 1:3,000 |
| 256 mm | 103 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A very tall, slim tower
- The tower is slender for its height. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the long vertical edges clean.
- Widening upper floors
- The shaft leans outward toward the top, with a fine grid of windows. A bigger print or Full detail keeps that grid readable.
- One piece with the ground
- Madison Square Park Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Madison Square Park Tower takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Madison Square Park Tower is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Madison Square Park Tower STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Madison Square Park Tower grows with the print: about 64 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
