3D print 7 World Trade Center
A free, printable model of 7 World Trade Center and the skyscrapers, streets and plazas around it in Lower Manhattan, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 7 World Trade Center
7 World Trade Center is an office building in Lower Manhattan, New York City, and belongs to the new World Trade Center. The block is edged by Greenwich Street to the east, Vesey Street to the south, Washington Street to the west and Barclay Street to the north. Larry Silverstein, who leases the land from the Port Authority, developed the tower, and Skidmore, Owings & Merrill designed it. It replaced an earlier 7 World Trade Center, completed in 1987 and destroyed in the attacks of September 11, 2001.
Construction began in 2002 and finished on May 23, 2006. The tower has 52 stories above ground plus one underground floor, and stands 226 m (741 ft) tall. Its footprint is narrower than its predecessor's, so Greenwich Street could return, reconnecting TriBeCa with the Financial District. A small park across that street sits on land that formed part of the earlier tower's footprint.
Safety shaped the design: the core is reinforced concrete, the stairways are wider, and the steel columns carry thicker fireproofing. The building has numerous green design features and it received LEED Gold certification. David Childs worked with glass artist James Carpenter on the facade, which pairs ultra-clear glass with textured stainless-steel spandrels. An electrical substation fills the lowest ten floors and powers much of Lower Manhattan.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 61 mm | 1:3,750 |
| 200 mm | 76 mm | 1:3,000 |
| 256 mm | 97 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fine vertical lines on the facade
- The tower is a plain slab wrapped in closely spaced vertical lines. Print friendly adapts that fine pattern to the print scale, while layers of 0.12 to 0.16 mm keep the lines crisp at larger sizes.
- A tall slab among tall towers
- The tower is a tall, flat-topped block among other tall towers, so slow printing and good cooling help the upper floors stay clean. A bigger print also keeps the street gaps between towers open.
- One piece with the ground
- 7 World Trade Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 7 World Trade Center takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
7 World Trade Center is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 7 World Trade Center STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 7 World Trade Center grows with the print: about 61 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
