3D print the Martinitoren
A free, printable model of the Martinitoren, a very tall, slender tower with an open lantern top, rising above the buildings around a city square, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Martinitoren in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 97 m
- On a 160 mm print
- 26 mm
- Scale
- 1:3,750
97 m of the Martinitoren, 26 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Open lantern crown
The top stages are open, thin and airy. Print friendly adapts the thinnest parts to the print scale; Full detail keeps them on a larger print.
- Very tall, narrow tower
A tall, narrow tower needs care when printed upright. Print slowly with good cooling and a layer height of 0.12–0.16 mm.
- One piece with the ground
The Martinitoren is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Martinitoren takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Martinitoren
The Martinitoren, also known as the Martini or St. Martin's Tower, serves as the bell tower of the Martinikerk and is the tallest church steeple in Groningen, Netherlands. It rises on the Grote Markt, the main market square, at its north-eastern corner. Its brick spiral staircase has 260 steps, and the carillon inside has 62 bells. Citizens of Groningen call it d'Olle Grieze, meaning the old gray one in the local dialect.
A first tower on the site, about 30 meters high and Romanesque, was destroyed by lightning. A second tower, about 45 meters high and built in the 15th century, was also devastated by lightning. Most of the third and present tower went up between 1469 and 1482, built from Bentheimer sandstone blocks. The steeple was completed only in the mid-16th century, and the Dom Tower of Utrecht influenced the design.
The tower was first an estimated 102 meters high. In 1577, after Spanish and Walloon troops departed, celebratory fires lit on the third gallery made it partially collapse, leaving 69 meters. In the 17th century it was repaired up to its height of 97 meters. It tilts about 0.6 m, and reportedly its foundation is only three meters deep. One of the bells carries a bullet hole from the heavy fighting when Canadian forces liberated Groningen toward the end of World War II.
About this model
The Martinitoren is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





