A white 3D print of the Minnesota State Capitol, a wide building with a central dome and two smaller domes at its ends, facing green lawns and paths with streets around it.

3D print the Minnesota State Capitol

A free, printable model of the Minnesota State Capitol, its dome and two end domes, and the lawns, malls and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Minnesota State Capitol model, North view North
  • Minnesota State Capitol model, East view East
  • Minnesota State Capitol model, South view South
  • Minnesota State Capitol model, West view West

© OpenStreetMap contributors

The model you print

Minnesota State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
67 m
On a 160 mm print
18 mm
Scale
1:3,750

67 m of the Minnesota State Capitol, 18 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome, lantern and small cupolas

    The central dome ends in a small lantern, and two smaller domes cap the building's ends. Print friendly adapts the thin lantern tip to the print scale; Full detail keeps it on a larger print.

  2. Columns and arched facades

    The front has columns, arches and a stepped entrance. A larger print size and a 0.12-0.16 mm layer height keep these facade details crisp.

  3. One piece with the ground

    The Minnesota State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Minnesota State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Minnesota State Capitol

The Minnesota State Capitol is where the government of Minnesota sits, in the capital city of Saint Paul. It holds the state Senate and House of Representatives, plus the offices of the governor and the attorney general, and a chamber for the Supreme Court. It is the third State Capitol building. Cass Gilbert designed the present one, completed in 1905 at a construction cost of US$4.5 million, with his design chosen over 41 other submissions.

Gilbert drew on the Chicago fair of 1893, formally the World's Columbian Exposition, and on the Rhode Island State House by McKim, Mead & White, for a design in the Beaux-Arts/American Renaissance manner. East to west the building is more than 130 m (430 ft) long, and it measures 67 m (220 ft) from ground level up to the lantern crowning the dome. Inside it has more than 28,000 m² (300,000 sq ft) of floor space.

Anywhere in the world, only Saint Peter's Basilica, which Gilbert took as his model, has a larger self-supported marble dome. The Capitol's dome has three layers, and the outer one is self-supporting Georgia marble blocks. The building sits within a landscaped campus: Capitol Mall lies at the south front, Leif Erikson Park to the west and Judicial Plaza to the east. In 1972 it joined the National Register of Historic Places.

About this model

The Minnesota State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Saint Paul

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits