3D print Monar Jonban
A free, printable model of Monar Jonban with its two minarets and the open ground and roads around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Monar Jonban in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 18 m
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
18 m of Monar Jonban, 5 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender twin minarets
The two minarets are thin, patterned towers with small domed tops. Print slowly with good cooling, and use a 0.12–0.16 mm layer height; "Print friendly" adapts thin parts to the print scale.
- Fine arches and brickwork
The arched front has delicate decoration, and the walls carry fine brick courses. The model is small at default size, so a larger print keeps more of this detail.
- One piece with the ground
Monar Jonban is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Monar Jonban takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Monar Jonban
Monar Jonban, also spelled Menar Jonban, is a mosque and mausoleum in Esfahan, in Iran's Isfahan province. Its name means "Shaking Minarets". Its intended role was a shrine over the grave of a Sufi ascetic. The Iran National Heritage List includes it, with an entry dated June 10, 1942.
Öljaitü had a shrine constructed above an ascetic's grave in 1316 CE. Construction began in the Ilkhanate era and ended in the Safavid era. The Safavids renovated the building, and Baha al-Din al-Amili, an architect and Twelver Shi'a scholar, ultimately completed it. At first it had no minarets, and the Safavids added the twin minarets. A cemetery once surrounded the building.
Turquoise stones with many sides and blue tiles decorate the building. Its overall look reflects Mongolian masonry, while the iwan and the minarets show Safavid influence. The twin minarets are 17.5 meters (57 ft) tall, each crowned by a blue onion dome. The building's name comes from this pair, which shake together when one of them is shaken.
About this model
Monar Jonban is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
