3D print the Jameh Mosque of Isfahan
A free, printable model of the Jameh Mosque of Isfahan, with its central courtyard, domes and twin minarets and the streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Jameh Mosque of Isfahan
The Jāmeh Mosque of Isfahān, also called the Friday Mosque of Isfahān or the Atiq Mosque, is a historic congregational mosque in Isfahan, Iran. The Grand Bazaar of Isfahan lies toward its southwest wing. From about 771 CE until the close of the 20th century, builders kept rebuilding, adding to and renovating it on the same site. UNESCO listed it as a World Heritage Site in 2012. Among Iran's monuments of Islamic architecture, it ranks alongside the largest and most important.
The first mosque here went up around 771, under the Abbasid caliph al-Mansur. It was relatively small and built of mud-brick with stucco decoration. A larger mosque replaced it in 840–841, measuring about 88 by 128 meters (289 by 420 ft), with a large central courtyard, an arcade and a hypostyle hall. Under the Buyid dynasty, two minarets were added at the entrance, the earliest recorded case of a double minaret arrangement, which later spread in Iran and elsewhere.
The Seljuk Empire made Isfahan its first capital after conquering it in 1050. In 1086–87, a large domed space replaced the columns that stood before the mihrab, and it was the biggest masonry dome of its day in the Islamic world. Another dome, on the north side, was built in 1088–89 and has interlacing ribs forming pentagons and five-pointed stars. Four monumental iwans around the courtyard gave the mosque its four-iwan form, and around 200 smaller vaults cover the remaining bays.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 10 mm | 1:3,750 |
| 200 mm | 13 mm | 1:3,000 |
| 256 mm | 16 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Rows of small domes
- Many small, shallow domes cover the roof. Layers of 0.12–0.16 mm keep their rounded shapes smooth, and Print friendly adapts the smallest ones when the print is small.
- Slim twin minarets
- Two slim minarets rise above the courtyard halls. Print slowly with good cooling; Print friendly adapts them to the print scale, while Full detail keeps them on a larger print.
- One piece with the ground
- The Jameh Mosque of Isfahan is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jameh Mosque of Isfahan takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Jameh Mosque of Isfahan is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Jameh Mosque of Isfahan STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Jameh Mosque of Isfahan grows with the print: about 10 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
