3D print Museum Het Prinsenhof
A free, printable model of Museum Het Prinsenhof and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Museum Het Prinsenhof in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine roof and wall detail
Buildings like this can carry small windows and roof details. A bigger print keeps more of them; use Full detail with a fine nozzle, or Print friendly for a small print.
- One piece with the ground
Museum Het Prinsenhof is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Museum Het Prinsenhof takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Museum Het Prinsenhof
Museum Het Prinsenhof stands in Delft, the Netherlands, and its name means "The Court of the Prince". The building began as a monastery of St Agatha, built in the Middle Ages. By 1925 Delft City Council owned all of it, and the council turned it step by step into a museum.
The building also became the home of the Dutch statesman William the Silent, who was assassinated there by Balthasar Gérard in 1584. Bullet holes in the wall beside the main stairs can still be seen. The museum displays art ranging from Dutch Golden Age paintings to prints, ceramics and contemporary art.
About this model
Museum Het Prinsenhof is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
