3D print Oldehove (tower)
A free, printable model of Oldehove, a tall tower with arched openings and a thin mast on top, beside water, a park and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Oldehove (tower) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 39 m
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
39 m of Oldehove (tower), 13 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin mast on top
A very slim mast rises from the flat top of the tower. Print friendly adapts it to the print scale; print slowly with good cooling, and use Full detail on a larger print.
- Tall, narrow shaft
The tower is tall and slender, with shallow arches and ledges on each face. A layer height of 0.12–0.16 mm and a bigger print size keep those details crisp.
- One piece with the ground
Oldehove (tower) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Oldehove (tower) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Oldehove (tower)
Oldehove is a leaning, unfinished church tower in the medieval center of the Dutch city of Leeuwarden. The tower is 39 meters (127.95 feet) tall and has 183 steps. Its top is displaced horizontally 2 meters (6 ft 7 in) from the center. Mostly brick, it also contains Bentheim sandstone.
The name Oldehove also belongs to an artificial mound, or terp, on which a Catholic church honoring Saint Vitus went up in the late 9th century. The adjoining Late Gothic tower was begun in 1529, when Leeuwarden’s citizens called for a tower higher than the Martinitoren in Groningen. Jacob van Aken was in charge, and Cornelis Frederiksz took over after his death.
The tilt began while the tower was going up. The builders tried to compensate for it, yet work came to a halt in 1532 (another source says 1533). The old church, by then derelict, was demolished in 1595–1596, while the tower remained. The original plan to attach a new church to the tower was never realized. Historisch Centrum Leeuwarden is its custodian.
About this model
Oldehove (tower) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





