3D print the Nepalgunj Airport New Terminal

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Separate central roof

   The central hall carries its own rolled metal roof, separate from the pitched wing roofs. Print friendly adapts the joins and rounded frames; Full detail keeps them at large sizes.

2. Glazed dome and canopies

   A low glazed dome sits over an open light well, and arched canopies project over the entrances on branching posts. Use 0.12–0.16 mm layers and a larger print to keep the ribs and posts.

3. One piece with the ground

   The Nepalgunj Airport New Terminal is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Nepalgunj Airport New Terminal takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.