3D print Ogikubo Station
A free, printable model of Ogikubo Station and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ogikubo Station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long platforms and roofs
Stations often have long platforms and thin roofs. A larger print size keeps these details; use Full detail with a fine nozzle, or Print friendly for a small print.
- One piece with the ground
Ogikubo Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ogikubo Station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ogikubo Station
Ogikubo Station serves the Suginami area of Tokyo, Japan, and two operators run it jointly: JR East (the East Japan Railway Company) and Tokyo Metro, the Tokyo subway operator. On the JR East side, the Chūō Main Line calls here, 18.7 km from Tokyo Station where the Chūō Line begins. The Tokyo Metro station sits on the Marunouchi Line, where it forms the western terminus.
The JR East station has ground-level platforms running east–west. Its two island platforms serve four tracks. The Tokyo Metro platforms lie underground, parallel to the JR East ones and slightly to the south, on the second basement level. The station has North and South entrances at the eastern end, plus a West entrance at the station's western end. The JR East station opened on December 21, 1891, and the Marunouchi Line station followed on January 23, 1962.
About this model
Ogikubo Station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
