3D print the Old Synagogue (Essen)
A free, printable model of the Old Synagogue in Essen and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Old Synagogue (Essen) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 37 m
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
37 m of the Old Synagogue (Essen), 11 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roofs and small details
Print friendly adapts small details to the print scale, while Full detail keeps every modeled feature. A layer height of 0.12–0.16 mm keeps fine vertical detail crisp, and a larger print keeps more of it.
- One piece with the ground
The Old Synagogue (Essen) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Old Synagogue (Essen) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Old Synagogue (Essen)
The Old Synagogue is a former Reform Jewish synagogue in Essen, Germany, with the address Steeler Straße 29. Edmund Körner designed it as a large stone building in Byzantine style, crowned with a copper dome, and its inauguration, as the Neue Synagoge, took place on September 25, 1913. Rabbi Salomon Samuel wanted a large new synagogue in the heart of the city to show how important Judaism was in German society. It measured 230 feet (70m) front to back, with a dome reaching 112 feet (37m). Its main hall had room for over 1,500 people.
Fire set on Kristallnacht, November 9–10, 1938, destroyed the interior, though the exterior stayed nearly intact. The building survived World War II without further damage. In 1960 it became a museum of industrial design, and a full reconstruction took place between 1986 and 1988, with plain plaster in place of the original blue mosaic on the dome. In 1988 the city council chose to make it both a memorial and a house for Jewish culture, and the building officially reopened on July 13, 2010.
About this model
The Old Synagogue (Essen) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
