A white 3D print of Palazzo dei Camerlenghi, a three-story palace with rows of arched windows and a few small rooftop dormers, standing at the edge of a canal with neighboring buildings.

3D print Palazzo dei Camerlenghi

A free, printable model of Palazzo dei Camerlenghi, a three-story palace with arched windows at the water's edge, with a canal, a bridge and neighboring buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Palazzo dei Camerlenghi model, North view North
  • Palazzo dei Camerlenghi model, East view East
  • Palazzo dei Camerlenghi model, South view South
  • Palazzo dei Camerlenghi model, West view West

© OpenStreetMap contributors

The model you print

Palazzo dei Camerlenghi in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
4 mm
Scale
1:3,750

4 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Rows of arched windows

    Small arched windows and a decorated cornice line repeat across every floor. Print friendly adapts them to the print scale; Full detail keeps them on a larger print, best with a 0.12–0.16 mm layer height.

  2. Dormers and chimneys on the roof

    A few small dormers and thin chimneys rise from the roof. A bigger print size helps them survive, and slow printing helps the thinnest ones.

  3. One piece with the ground

    Palazzo dei Camerlenghi is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Palazzo dei Camerlenghi takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Palazzo dei Camerlenghi

Palazzo dei Camerlenghi is a Renaissance palace in the San Polo quarter of Venice, in northern Italy. It faces the Grand Canal beside the Rialto Bridge. Construction took place in the fifteenth century, ending in 1488, and the building was enlarged between 1525 and 1528 following plans drawn by Guglielmo dei Grigi, who followed the manner of Mauro Codussi and Pietro Lombardo.

Several financial magistrates had their headquarters in the palace, among them the Consuls of the Traders, as well as the Supra-Consuls of the Traders, and the Camerlenghi di Comun, from whom the palace took its name. Its lower floor served as a jail for people who defaulted on debts; the spot beside the crowded Rialto Bridge acted as a warning to passersby.

The three-story palace has a pentagonal floor plan that runs along the shore of the Grand Canal, with tall windows separated by false columns and friezes as decoration. Polychrome marble and porphyry slabs once decorated it but are lost. Outgoing magistrates traditionally left a religious painting and a portrait in their office, so the palace came to hold many artworks; they were removed during the French occupation, and some returned to Venice, chiefly to the Gallerie dell'Accademia.

About this model

Palazzo dei Camerlenghi is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Venice

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits