3D print Park Towers at Hughes Center
A free, printable model of Park Towers at Hughes Center, with the mid-rise buildings and curving roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Park Towers at Hughes Center
Park Towers at Hughes Center consists of two 20-story condominium towers in Paradise, Nevada, on the east side of the Las Vegas Strip, within the Hughes Center business park, off Howard Hughes Parkway, not far from Flamingo Road and Paradise Road. Developer Irwin Molasky announced the project in March 1998 under the name The Park at Hughes Center, and within a year it was renamed Park Towers. Construction began in 1999, and the property was completed in 2001. Irwin Molasky and Mark Fine were the original developers, and Steve Wynn became a developer and designer on the project by July 1999.
The plan called for two condominium towers with 84 units, on a 3.8-acre (1.5 ha) plot, at an estimated cost of $100 million. Groundbreaking was delayed until April 1999. In September 1999, Société Générale and the Bank of Nova Scotia were announced as providers of $70 million in construction financing. The first residents moved in during March 2001, and the completion was celebrated in July 2001.
JMA Architecture Studios designed portions of the project, and the developer was High Rise JV LLC. Landscaping cost $1 million, and unit prices ran from $750,000 up to $5 million. Together with Turnberry Place, Park Towers gave rise to a condominium boom that started in Las Vegas in 2003.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 20 mm | 1:3,750 |
| 200 mm | 25 mm | 1:3,000 |
| 256 mm | 32 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Round corner turrets
- Small round turrets with caps sit at the corners and crowns of both towers. Print friendly adapts these small parts to the print scale; Full detail keeps them on a larger print.
- Two towers and a small pavilion
- A round pavilion with steps sits between the towers. A larger print size keeps it, and 0.12–0.16 mm layers keep the tower edges crisp.
- One piece with the ground
- Park Towers at Hughes Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Park Towers at Hughes Center takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Park Towers at Hughes Center is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Park Towers at Hughes Center STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Park Towers at Hughes Center grows with the print: about 20 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
