A white 3D print of the Petäjävesi Old Church, a log church with steep roofs and a bell tower topped by a cross, standing on a green slope above the water.

3D print the Petäjävesi Old Church

A free, printable model of the Petäjävesi Old Church, a log church with a bell tower, standing on a green slope beside the water, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Petäjävesi Old Church model, North view North
  • Petäjävesi Old Church model, East view East
  • Petäjävesi Old Church model, South view South
  • Petäjävesi Old Church model, West view West

© OpenStreetMap contributors

The model you print

Petäjävesi Old Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Fine log courses

    The walls are built from many thin horizontal logs. A larger print and a layer height of 0.12–0.16 mm keep the log lines readable instead of blurring into a smooth wall.

  2. Slim crosses on the roofs

    Thin crosses and a small lantern rise from the roofs and the bell tower. Print slowly with good cooling; Print friendly adapts them to the print scale, and Full detail keeps them as modeled.

  3. One piece with the ground

    The Petäjävesi Old Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Petäjävesi Old Church takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Petäjävesi Old Church

The Petäjävesi Old Church is a wooden church in Petäjävesi, Finland. It dates from 1763 to 1765, a time when Tavastia still belonged to Sweden, and its bell tower was built in 1821. In 1994 it was added to the UNESCO World Heritage List as a witness to the wooden church building tradition of the Nordic countries. It stands about 1 kilometer (0.62 mi) west of the center of Petäjävesi.

The church began as a chapel for the Petäjävesi area, which was part of the Jämsä congregation. The crown had allowed local people as early as 1728 to pay for a burial ground and a modest village church themselves, since the trip to Jämsä was long, but construction began only about 35 years later. Jaakko Klemetinpoika Leppänen, a builder of churches from Vesanka, planned and built it. Work in 1821 made the windows larger and shifted the sacristy from the north to the east, and his grandson Erkki Leppänen added the bell tower.

The church was originally built entirely of pine logs and has kept its original appearance and interior decoration exceptionally well. It shows influences from Gothic, Renaissance and Baroque architecture. Its cross-shaped plan has arms of similar size, while the tall roof recalls earlier Gothic style. Local craftsmen carved the pulpit, pews, galleries and chandeliers from pine. In 1879 the church stopped being used, an art historian noticed its value in the 1920s, and it has been restored several times since 1929.

About this model

The Petäjävesi Old Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits