3D print Lahti Stadium
A free, printable model of Lahti Stadium's long grandstand, with the oval track area, roads and open land around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Lahti Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long stand with fine facade
The model is a single long grandstand with many small openings and rooftop details. Print friendly adapts thin parts to the print scale; Full detail keeps every feature on a bigger print.
- Layer height for the details
A layer height of 0.12–0.16 mm keeps the repeated openings and roof details crisp.
- One piece with the ground
Lahti Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Lahti Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Lahti Stadium
Lahti Stadium, in Lahti, Finland, was built in 1981 and holds 14,500 spectators. It is a multi-purpose ground: cross-country skiing and biathlon take place there in winter, and in summer it is mostly used for football, when FC Lahti uses it as its home ground.
The stadium is well known as a skiing and biathlon venue. Together with the neighboring ski jumping hills it has staged the FIS Nordic World Ski Championships in three editions, 1989, 2001 and 2017, along with a long list of Cross-Country World Cup competitions, the earliest on March 6, 1982. It has also hosted three biathlon World Championships, in 1981, 1991 and 2000, and the biathlon World Cup for many years. It is designated a Cultural Heritage Site of National Significance.
About this model
Lahti Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
