3D print the Plaza de Toros de Ronda
A free, printable model of Ronda's Plaza de Toros and the surrounding buildings of the town, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Plaza de Toros de Ronda in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arcades and slender columns
The model has two open arcades carried on many slim Tuscan columns. Print friendly adapts the thinnest columns and arch edges; Full detail keeps all of them for a larger print.
- Tiled ring roof
The shallow double-pitched roof and its eave molding wrap the circular arena. Layers of 0.12 to 0.16 mm help the roof joints and finials read clearly.
- One piece with the ground
The Plaza de Toros de Ronda is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Plaza de Toros de Ronda takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Plaza de Toros de Ronda
A stone bullring on the west edge of Ronda, Spain, the Plaza de Toros de Ronda stands roughly two blocks from both the El Tajo canyon and Puente Nuevo. The bullring has a diameter of 66 meters (217 ft) and is ringed by a passage between two stone rings. Seating is arranged on two levels, with five raised rows on each, and 136 pillars carry 68 arches. Arabic tiles cover the sloping roof of the Royal Box.
Work on the ring began in 1779 and was finished in 1785; the design is attributed to architect Martín de Aldehuela. The building is one of the first bullrings built entirely of stone rather than a mix of stone and brick, and all of its seating is covered. Its first inaugural event, held in May 1784, ended with part of the stands collapsing, and the ring reopened in May 1785. Seating is limited to five thousand, yet the bull ring is the largest in Spain.
The ring also houses the Museo Taurino, a museum holding two centuries of bullfighting regalia, along with weapons used by the Real Maestranza. Bronze statues of Cayetano Ordóñez and his son Antonio stand outside one entrance, and the Feria Goyesca, a bullfight staged in the first week of September, was created by Ordóñez.
About this model
The Plaza de Toros de Ronda is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
