3D print the Rogers Tower
A free, printable 3D model of Rogers Tower and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Rogers Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 149 m
- On a 160 mm print
- 40 mm
- Scale
- 1:3,750
149 m of the Rogers Tower, 40 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the tower slowly
Slow printing with good cooling helps a tall tower stay clean at the top. A layer height of 0.12–0.16 mm keeps fine vertical detail crisp, and a larger print size keeps small details.
- One piece with the ground
The Rogers Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Rogers Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Rogers Tower
Rogers Tower is a skyscraper in Coal Harbour, in the downtown core of Vancouver, British Columbia, Canada, at 1067 West Cordova Street. Local architect James K. M. Cheng is credited with the design. The tower is 149 m (489 ft) high and was finished in 2004. It houses the Lower Mainland Operations headquarters of Rogers Communications.
Offices fill the lower 16 floors, and the upper 24 floors hold 130 work-live condominiums. The building was once named for Shaw Communications, which occupied 11 full floors. It has two official addresses, 1067 as the business address and 1077 as the residential one. In May 2023 the name changed from Shaw Tower to Rogers Tower, following the merger of Shaw Communications into Rogers Communications. One of Canada's biggest conglomerates, the Jim Pattison Group, is headquartered in the tower.
About this model
The Rogers Tower is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
