3D print the Royal National Theatre
A free, printable 3D model of the Royal National Theatre on the South Bank in London, generated from real map data in your browser, with the Thames and the surrounding buildings around it.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A broad building in plan
The theater is wide and low, so most of its shape comes through the footprint and the roof lines; a larger print or Full detail keeps those edges clean.
- Layers for the roof edges
Layers of 0.12 to 0.16 mm keep the roof edges and wall lines crisp, and a slower speed helps if you scale the print up.
- One piece with the ground
The Royal National Theatre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Royal National Theatre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Royal National Theatre
The Royal National Theatre is both a venue and a company, on the South Bank beside the Thames in London, next door to the Southbank Centre but separate from it. Laurence Olivier founded the company in 1963, and it worked from The Old Vic in Waterloo until 1976. Shakespeare, classic drama from other countries and new writing all feature in its program, which also tours to venues around the United Kingdom.
Sir Denys Lasdun and Peter Softley designed it with the structural engineers Flint & Neill, and Sir Robert McAlpine built it. The three stages opened one by one in 1976 and 1977. The company gained permission to use the "Royal" prefix in 1988, though the full title is seldom heard.
The Olivier, named for the company's first artistic director, is the main house: its open stage faces a fan-shaped bank of 1,160 seats, after the Ancient Theatre of Epidaurus, and a five-storey drum revolve drops eight meters below the stage. The Lyttelton holds 890 on two raked tiers under a proscenium arch, and the Dorfman, at 400 seats, is the smallest and most flexible of the three.
About this model
The Royal National Theatre is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
