3D print the Rykestrasse Synagogue
A free, printable model of the Rykestrasse Synagogue in Berlin, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine facade details
For the small details on the facade, print at a larger size and use 0.12–0.16 mm layers; Print friendly adapts the finest parts if you print small.
- Landmark detail setting
Full detail keeps every modeled feature and suits a large print or a fine nozzle; Print friendly adapts thin parts and small details to the print scale.
- One piece with the ground
The Rykestrasse Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Rykestrasse Synagogue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Rykestrasse Synagogue
Rykestrasse Synagogue serves a Conservative Jewish congregation in Prenzlauer Berg, part of Berlin's Pankow borough, Germany. It is Germany's largest synagogue, and the building is a protected monument. Johann Hoeniger gave it the Romanesque Revival style; it was finished in 1904 and opened on September 4 that year, just before Rosh Hashanah.
The community needed more synagogues within walking distance. Berlin's Jewish Community bought the site in Rykestraße in 1902 and asked Hoeniger, its building master, to design and supervise the new synagogue. Construction started in 1903. It sits back from the street line, behind a front building, and a passage through that building leads to it.
During the November Pogrom of 1938, the synagogue did not burn. Because it sits within a block of residential buildings, the Nazis ordered the destruction of its furnishings instead; a fire started among burning Torah scrolls and smashed furniture but was put out before it spread to the building. The community repaired it and reopened it on April 3, 1939, and regular ceremonies continued until services were halted in 1940.
About this model
The Rykestrasse Synagogue is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
