3D print the Khadija Mosque
A free, printable model of the Khadija Mosque in Berlin and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Khadija Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 13 m
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
13 m of the Khadija Mosque, 4 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin parts and small details
Print friendly adapts thin parts to the print scale, while Full detail keeps them on larger prints. Print slowly with good cooling for any tall, thin tip.
- One piece with the ground
The Khadija Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Khadija Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Khadija Mosque
The Khadija Mosque is in Heinersdorf, Pankow, Berlin, Germany. It opened on October 16, 2008, as the earliest mosque of former East Germany. The Ahmadiyya Muslim Jamaat Deutschland administers it. Ahmadiyya women collected the money that paid for the mosque, and Mubashra Ilyas, an architect within the community, designed it. It has capacity for 500 worshippers.
The foundation stone for the two-story mosque was laid on January 2, 2007, by the 5th Khalifa, Mirza Masroor Ahmad. It stands on a site of 4,790 square meters (51,600 sq ft) and has two prayer rooms, one for 250 women and one for 250 men. The dome is 4.5 m (15 ft) high with a diameter of 9 m (30 ft), and the minaret is 13 m (43 ft) high. The mosque, an imam's residence and offices cost about €1.7 million.
About this model
The Khadija Mosque is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
