3D print the Sapporo TV Tower
A free, printable model of the Sapporo TV Tower in Odori Park, with the surrounding streets and buildings of Sapporo, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sapporo TV Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 147 m
- On a 160 mm print
- 39 mm
- Scale
- 1:3,750
147 m of the Sapporo TV Tower, 39 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Clocks and cabin
Four clock fascias and a faceted observation cabin sit high on the shaft. Print friendly adapts the small clock boards and window frames; Full detail keeps them for a larger print or a finer nozzle.
- Open lattice tower
The tower is an open steel lattice on four splayed legs, with a slender stepped antenna above. Print slowly with cooling for the tall upper section, and use 0.12–0.16 mm layers to keep the bracing crisp.
- One piece with the ground
The Sapporo TV Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sapporo TV Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sapporo TV Tower
The Sapporo TV Tower stands in Odori Park in Sapporo, on the northern Japanese island of Hokkaido. Completed in 1957, it is 147.2 meters (483 ft) tall and has an observation deck at 90.38 meters. Tachū Naitō, the architect known for planning Tokyo Tower, designed it, and construction cost 170 million yen.
The tower works as a repeater for the radio stations AIR-G and FM North Wave, with its transmission facility on Mount Teine. In 1961, digital clocks were installed 65 meters above the ground on all four sides. They were donated by Matsushita Electric Industrial, repaired in 1998 and 2006, and converted to LEDs in 2006. The interior and exterior were renovated in 2002, and the tower is open to tourists.
Inside, the ground floor holds an information center and stores, the second floor has a multipurpose hall and administration office, and the third floor contains a souvenir shop and restaurant. A lift from the third floor reaches the observation deck, which looks out over Odori Park, Mount Ōkura and Maruyama. An underground arcade called Aurora Town opens off the basement.
About this model
The Sapporo TV Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
