3D print Scott Stadium
A free, printable model of Scott Stadium with the roads and buildings around it in Charlottesville, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Scott Stadium
Scott Stadium, in Charlottesville, Virginia, is where the Virginia Cavaliers football team plays. The stadium stands on the Grounds of the University of Virginia, between Hereford College, to its west, and Brown College and the Lawn, to its east. Its full name includes The Carl Smith Center, which results from a string of donations by Carl Smith. It dates from 1931 and ranks as the oldest active FBS stadium in Virginia.
It cost US$300,000 at the time and replaced the old Lambeth Field, or "Colonnades". Frederic William Scott, a donor and rector of the University, gave it his name, and it held 25,000 spectators at opening. Artificial turf, installed in 1974, ended the practice of a mounted Cavalier riding in with the football team. A gift from David A. Harrison III let natural grass return, and since 1995 the Cavalier has ridden in at every game, with orange and blue fireworks.
In 1981, upper decks and grass hill seating raised the capacity to 40,000 fans. In 2000, Carl Smith's donations completed the upper deck and south end, with room for 20,000 more fans, and added the pergola, new lighting and a large audio and video tower called Hoo-Vision. Among its concerts were U2 in 2009, the Rolling Stones in 2005 and the Dave Matthews Band in 2001. It also hosted the NCAA Division I championship in men's lacrosse in 1977 and again in 1982.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 19 mm | 1:3,750 |
| 200 mm | 23 mm | 1:3,000 |
| 256 mm | 30 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Tall, thin light towers
- Slim light towers rise above the rim of the bowl. Printing slowly with good cooling helps tall thin parts, and Print friendly adapts them to the print scale.
- Many seating rows and outer ribs
- The bowl is built from many thin seating rows, with fine vertical ribs on its outer wall. Layers of 0.12 to 0.16 mm keep them crisp, and a bigger print size keeps more of the rows.
- One piece with the ground
- Scott Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Scott Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Scott Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Scott Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Scott Stadium grows with the print: about 19 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
