3D print the Shah Jahan Mosque, Thatta
A free, printable model of the Shah Jahan Mosque in Thatta, with its courtyard, many small domes and the green grounds and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Shah Jahan Mosque, Thatta in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dozens of small domes
The roofs are covered with many small domes in rows around the courtyard. They are tiny at print scale: use Full detail on a larger print to keep each one, or Print friendly to adapt them to the print scale.
- Pointed arches in the walls
Rows of shallow pointed arches run along the outer walls and the courtyard galleries. A 0.12 mm layer height in the slicer keeps these fine vertical details crisp.
- One piece with the ground
The Shah Jahan Mosque, Thatta is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Shah Jahan Mosque, Thatta takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Shah Jahan Mosque, Thatta
The Shah Jahan Mosque, whose other name is the Friday Mosque of Thatta, serves Thatta, in Pakistan's Sindh province, as its main congregational mosque. It lies in the east of the city, close to the Makli Necropolis, which is a UNESCO World Heritage Site. Persian inscriptions at the site date its construction to the years 1644 to 1647, and an addition on the east side was finished in 1659.
The Mughal emperor Shah Jahan ordered the mosque as thanks for the hospitality extended by Sindh's people during his time as a refugee in the city. Its tile decoration is regarded as the most elaborate anywhere in South Asia, and the palette runs from cobalt blue and turquoise to manganese violet and white. Its brickwork is laid in geometric patterns, a decorative element unusual for mosques of the Mughal period.
The plan follows a caravanserai, around a large courtyard ringed by domed rooms. The rectangular courtyard spans 169 feet (52 m) in one direction and 97 feet (30 m) in the other, with an iwan, or portal, on each of its four sides and aisled galleries lined with 33 arches. The mosque has no minarets, but its 93 domes are more than any other structure in Pakistan has.
About this model
The Shah Jahan Mosque, Thatta is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





