A white 3D print of the Sheesh Mahal, a low palace with an arched front and angled wings around a courtyard, set among fort walls, lawns and paths.

3D print the Sheesh Mahal (Lahore Fort)

A free, printable model of the Sheesh Mahal, its arched front and angled wings around a courtyard, among the walls and lawns of Lahore Fort, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Sheesh Mahal (Lahore Fort) model, North view North
  • Sheesh Mahal (Lahore Fort) model, East view East
  • Sheesh Mahal (Lahore Fort) model, South view South
  • Sheesh Mahal (Lahore Fort) model, West view West

© OpenStreetMap contributors

The model you print

Sheesh Mahal (Lahore Fort) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Arcade of paired columns

    Five arches on slender paired columns open the courtyard front. Print friendly adapts these thin columns to the print scale; Full detail keeps them for large prints or a fine nozzle.

  2. Small, low building

    The palace is low and compact, with shallow arch outlines on its walls. A bigger print size and layers of 0.12 to 0.16 mm keep the arches and the ribbed roof readable.

  3. One piece with the ground

    The Sheesh Mahal (Lahore Fort) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sheesh Mahal (Lahore Fort) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Sheesh Mahal (Lahore Fort)

The Sheesh Mahal, or Palace of Mirrors, is a palace in Lahore, Pakistan, set in the Shah Burj block in the north-western corner of Lahore Fort. It was built in 1631–32 under the Mughal emperor Shah Jahan, and the Sikh ruler Ranjit Singh made later additions. Its use was limited to the imperial family and the aides close to them. It is one of 21 monuments raised inside the fort by successive Mughal emperors.

Its white marble walls and ceilings are inlaid with pietra dura and fine mirror work made of thousands of small mirrors. The front opens onto the courtyard through five cusped marble arches resting on paired columns. The pavilion is laid out as a semi-octagon, with apartments under gilded cupolas, and the central hall's roof reaches two stories. Ranjit Singh later used the block to show off the Koh-i-Noor.

Buildings added on top during Sikh and British rule left the structure at risk of collapse, and repairs were made in 1927 and again in the 1960s. Pakistan listed it as a protected monument in 1975, and as part of the Lahore Fort Complex it became a UNESCO World Heritage Site in 1981. Its ceiling problems were fully fixed and the building restored in 2006.

About this model

The Sheesh Mahal (Lahore Fort) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits