A white 3D print of the Shwedagon Pagoda, a tall bell-shaped stupa on a stepped octagonal base with a fine crown, set on a wide platform among low buildings and green ground.

3D print the Shwedagon Pagoda

A free, printable model of the Shwedagon Pagoda and the platform, low buildings and green ground around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Shwedagon Pagoda model, North view North
  • Shwedagon Pagoda model, East view East
  • Shwedagon Pagoda model, South view South
  • Shwedagon Pagoda model, West view West

© OpenStreetMap contributors

The model you print

Shwedagon Pagoda in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
112 m
On a 160 mm print
30 mm
Scale
1:3,750

112 m of the Shwedagon Pagoda, 30 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. A fine open crown

    The top ends in a slender, open crown. Print friendly adapts it to the print scale; Full detail keeps it on a larger print, ideally with 0.12–0.16 mm layers. Print slowly with good cooling.

  2. Rings and a stepped base

    Many thin rings band the upper stupa, and the base has a stepped, serrated edge. A bigger print size keeps these ridges distinct.

  3. One piece with the ground

    The Shwedagon Pagoda is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Shwedagon Pagoda takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Shwedagon Pagoda

The Shwedagon Pagoda is a gilded stupa in Yangon, Myanmar. Its official name is Shwedagon Zedi Daw, meaning "Golden Dagon Pagoda", and it is also called the Great Dagon Pagoda or the Golden Pagoda. Believed to enshrine relics of the four earlier Buddhas of the present kalpa, it is described as Myanmar's most sacred Buddhist pagoda. The 112 m (367 ft) pagoda crowns Singuttara Hill, which is 51 m (167 ft) high, and reaches an altitude of 170 m (560 ft). Zoning rules cap Yangon's buildings at 127 m (417 feet) above sea level, or 75% of the pagoda's height above sea level.

According to legend, the pagoda was built more than 2,500 years ago, in the Buddha's lifetime, which would make it the world's oldest Buddhist stupa. The royal chronicles mention it first in 1362/63 CE, when King Binnya U raised it to 18 m (59 ft); Queen Shin Saw Pu later brought it to 40 m (130 ft), gilding it too. A 1768 earthquake toppled the top, and in 1775 King Hsinbyushin rebuilt it to 99 m (325 ft), not counting the hti, or crown umbrella. A new hti came from King Mindon in 1871.

Gold plates cover the bricks of the stupa's plinth. Above the base come terraces, the bell-shaped part, the turban, an inverted almsbowl, lotus petals, a banana bud, and finally the umbrella crown, set with 5,448 diamonds as well as 2,317 rubies. A 76 carat (15 g) diamond sits on the diamond bud at the very top. Each of the four entrances has a flight of steps up to the platform and is watched over by a pair of giant leogryphs.

About this model

The Shwedagon Pagoda is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits