3D print the Sinan Pasha Mosque (Prizren)
A free, printable model of the Sinan Pasha Mosque, with its dome and tall minaret among small buildings, streets and a little water, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sinan Pasha Mosque (Prizren) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 44 m
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
44 m of the Sinan Pasha Mosque (Prizren), 13 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall, slender minaret
The minaret is the thinnest part of the model. Print slowly with good cooling, and use Print friendly for small prints or Full detail for a larger one.
- Dome and half-domes
Curved domes show layer steps. A 0.12–0.16 mm layer height keeps the curves smooth, and a larger print size keeps the ribbing.
- One piece with the ground
The Sinan Pasha Mosque (Prizren) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sinan Pasha Mosque (Prizren) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sinan Pasha Mosque (Prizren)
Prizren, Kosovo, is home to the Sinan Pasha Mosque, an Ottoman-era mosque that the Ottoman Albanian pasha Sofi Sinan built in 1615. It overlooks the main street and is a dominant feature of the town's skyline. Work on it began in either 1600 or 1608. Its builder, Sofi Sinan Pasha, was a native of Prizren and a former beylerbey and kaymakam in Bosnia, and should not be confused with the grand vizier Sinan Pasha, who built a mosque in Kaçanik.
The mosque is square, about 14 m (46 ft) on each side. It has one large dome, plus a smaller half-dome above the mihrab. The mihrab carries paintings and a stalactite hood. Its walls measure 1.65 m (5.4 ft) in thickness. The minaret rises 43.5 m (143 ft) and ends in a conical top clad in lead, and lead sheathes the main dome and the half-dome too.
Painted decoration inside, mostly floral patterns and Qur'an verses, covers the walls and dome and dates from the 19th century. The minbar is painted with floral motifs, and the stone floor and the carpentry are original. In 1990 the Republic of Serbia gave the mosque the status Monument of Culture of Exceptional Importance.
About this model
The Sinan Pasha Mosque (Prizren) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





